ENGINE WARRANTY

Thank You for Choosing Fitz Auto Group for Your Recycled Engine Purchase

This warranty applies exclusively to the original purchaser for private, non-commercial use, and is valid only for the vehicle in which the product was originally installed. It is non-transferable.

In the event of a warranty claim, Fitz Auto Group reserves the right to replace the part at its discretion. Replacement parts may have equal or greater mileage than the original. The warranty is limited to the price paid for the product and begins from the date of purchase. Coverage is for part replacement only.

While the purchased product is a “long block” engine (engine block and cylinder head), certain accessories provided at no additional charge are not covered under this warranty. These include but are not limited to manifolds, sensors, and electrical components. Please ensure that correct parts are used for your vehicle, even if transferring components from your old engine is necessary.

Warranty Details:

The engine warranty is valid for 6 months or 6,000 miles (whichever occurs first) from the original purchase date.

Exclusions from the Mechanical Parts Warranty:

The warranty does not cover:

  • Failures caused by non-covered components, improper installation, or defective workmanship.
  • Improper maintenance, such as the use of incorrect fluids or lubricants, as outlined in the vehicle’s owner’s manual.
  • Usage for purposes other than the engine’s intended function.

Covered Components Under Warranty:

  • Cylinder head(s)
  • Engine block
  • Head gasket
  • Internal lubricated parts (crankshaft, camshaft, pistons, oil pump, valves, etc.)
  • Engine timing components (excluding timing belts, which must be replaced prior to installation).

Your engine may have the optional accessories attached for convenience, but are not covered under the warranty. Those items include but are not limited to,

  • Alternator
  • A/C Compressor Assembly
  • Bracket(s)
  • Engine Computer(s)
  • High Pressure Fuel Injection Pump(s)
  • Flywheels
  • Exhaust Manifold
  • Gasket(s)
  • Intake Manifold
  • Wire Harness
  • Valve Cover(s)
  • External Belt Drive Water Pump(s)
  • Oil Pan
  • Sensor(s) and Switch(s)
  • Supercharger
  • Turbocharger
  • Timing Cover(s)
  • Throttle Body
  • Injector(s)
  • Timing Belt(s) and Tension Bolt(s)
  • Fuel Rail
  • Ignition Coil(s)
  • Spark Plug(s) and Wire(s)
  • Starter
  • Steering Pump
  • Mount(s)

Important Warranty Requirements:

To maintain warranty eligibility, the following are required:

  1. Repairs must have prior approval.
  2. Installation must follow Fitz Auto Group’s Required Installation Procedures.
  3. Proof of maintenance and original installation invoices must be provided for all warranty claims.

Installation Notes:

Before installation, the following tasks are mandatory to validate the warranty:

  • Diagnose and repair the cause of the original engine failure.
  • Clear all vehicle diagnostic codes.
  • Replace timing belts, gaskets, thermostat, spark plugs, and filters.
  • Inspect and flush the cooling system.
  • Replace the radiator and engine oil cooler, if applicable.

In the Event of a Failure: DO NOT uninstall the engine before contacting Fitz Auto Group. Doing so may void the warranty.

Non-Covered Situations:

The warranty will be void if:

  • The vehicle is used for commercial, fleet, or racing purposes.
  • The product is installed in an unintended application.
  • Maintenance requirements are not met, including failure to document oil changes every 4,000 miles.
  • Damage results from towing, collisions, or natural disasters.

Additional Terms and Conditions:

  • Fitz Auto Group reserves the right to inspect the product before replacement.
  • Labor costs are not covered unless pre-approved.
  • Accessories and extra parts attached to the engine (e.g., sensors, belts, water pumps) are not covered under this warranty.
  • The warranty does not cover incidental or consequential damages, freight costs, or injuries caused during installation.

For further details, visit our website or contact Fitz Auto Group directly.

Thank you for choosing Fitz Auto Group for your automotive needs!

ALL WARRANTIES ARE NULL AND VOID IF

  • The vehicle is used in a fleet, taxi, government, commercial vehicle, or limo service or has been converted from private passenger use to commercial or fleet use, or is used for racing or other competition or off-road recreational purposes. 
  • The part is installed in an application for which the vehicle manufacturer did not intend it. 
  • Failure is caused by abuse, misuse, or modifications. 
  • Failure is caused by towing a trailer or other vehicle unless your vehicle is equipped for this purpose as recommended by the vehicle manufacturer.
  • The vehicle has been modified to plow snow, whether the snowplow is attached to the vehicle or not. 
  • The part fails or becomes defective due to the vehicle being involved in a collision. 
  • The part is installed or operated in a vehicle outside of the United States or Canada. 
  • The installed heat tab center is melted or removed. 
  • The Fitz Auto “Required Installation Procedures Tag” is not complied with upon installation. 
  • The part is sold “As Is” as indicated on the front of the invoice. 
  • The vehicle is not serviced at proper intervals, or fuel/oil/coolant is not used in accordance with the vehicle manufacturer’s specifications.
  • The engine oil and filter are not replaced and documented every 4,000 miles with appropriate OEM recommended motor oil. (Must be documented) 
  • The transmission fluid and filter are not replaced at time of installation with OEM recommended transmission fluid. (Must be documented) 
  • Failure is caused by or related to a collision, fire, theft, vandalism, riot, explosion, lightning, earthquake, windstorm, hail, water, freezing or flood.

TERMS AND CONDITIONS

Approval for Repairs or Replacements: Approval for repairs or replacements must be obtained from Fitz Auto Group prior to any work being performed.

Inspection Rights: Fitz Auto Group reserves the right to inspect any product prior to replacement.

Labor Payments: Payment for labor requires Fitz Auto Group’s approval of the estimate, prior review or proof of scheduled maintenance, and proof of the completed work.

Original Invoice Requirement: The original invoice must accompany all returns.

Maintenance Receipts: Appropriate maintenance receipts are required.

Non-Transferable Warranty: This warranty is not transferable.

Vehicle Year and Model Disclaimer: The year and model of the vehicle or part printed on the invoice are within a range of interchangeability and may not necessarily be the exact model and year of the part or vehicle provided.

Exclusions for Glass: Windshield and other glass breakage are not covered under this warranty.

Owner’s Manual Reference: Refer to the vehicle manufacturer’s “Owner’s Manual” for correct operation and maintenance schedules.

Accessory Disclaimer: Some parts may include attached accessories that must be switched or removed for proper installation. Such accessories are provided for convenience and are not covered under this warranty. Engine warranties are limited to defects in the block, heads, pistons, crankshafts, camshafts, rockers, and oil pumps. No warranty is provided for additional parts such as switches, sensors, cables, electronics, belts, hoses, water pumps, and manifolds.

Required Installation Procedures: Any “Recommended Installation Procedures” provided by Fitz Auto Group must be followed by the installer to maintain warranty coverage.

Exclusions for Freight and Damages: This warranty does not cover freight costs or similar damages.

Liability Disclaimer: Fitz Auto Group is not responsible for injuries or damages during or resulting from the installation of its products.

Routine Maintenance Items: Timing belts, water pumps, thermostats, spark plugs, fluids, and seals are routine maintenance items and should be replaced at installation and at the vehicle manufacturer’s recommended service intervals.

Cooling and Electrical System Checks: Proper operation of the cooling and electrical systems must be verified during installation to avoid potential product issues.

Fluid Replacement Responsibility: While most fluids have been drained from products, it is the installer’s responsibility to completely drain and replace fluids, lubricants, antifreeze, and filters with fresh, approved replacements.

Transmission Requirements: The installer must replace the radiator or transmission oil cooler, flush transmission oil cooling lines, fill the differential, adjust shifter mechanisms, replace filters, replace seals, replace pan gaskets, and reset or replace computer codes when installing a transmission.

Engine Warranty Exclusions: Claims related to overheating or improper lubrication of the engine or its components are not covered by this warranty.

Suspension and Steering Components: Tie rod ends, ball joints, wheel bearings, and bushings related to steering and suspension components are not covered by this warranty and should be inspected and replaced as needed by the installer.

Failure Protocol: In the event of failure, the purchaser must take all reasonable steps to protect the product from further damage and return the original defective product to Fitz Auto Group. The purchaser must provide Fitz Auto Group with any requested information, including proof of the vehicle’s regular maintenance as recommended by the manufacturer.